03-16 Black Exhaust Manifold Blanket Fits Dodge Cummins Diesel RAM 5.9 6.7

Description

(1) manifold blanket that
fits stock and aftermarket 5.9 and 6.7 (EGR Deleted) Common Rail Cummins exhaust manifolds.
Two types of fasteners available and shown in the pictures. Anchor hooks, or grommets. Anchors are the default fastener and in my experience the better overall fastener. If you prefer grommets for your application. Please note it and the blanket will be made with grommets.
*
Faster Spool Up
*
Lower underhood temps
*
Cooler Intake air temps
*
Lower exhaust gas temps
*
Fast Install, usually less than 15 minutes
*
Will not become brittle, stays soft  and pliable even after years of
use.
*
Made specifically for Cummins stock and aftermarket manifolds, not one size fits all.
*
3 full layers, top and bottom layers of silica cloth.  Middle layer of 1/2" thick silica insulation.  Rated at 1800 degrees continuous and ability for short excursions to 3000 degrees.  Not your average heat blanket.
*I've personally driven my truck with the Turbo Sock 1600 miles and 24+ hours straight and still been able to touch the top of the blanket without even coming close to being burned.  That's the same exact material used in the manifold blankets.  If you try that with a factory heat shield or cheaper inferior blanket, do it in the hospital burn unit parking lot.
*Don't be fooled by other blankets advertising 1" thick insulation.  It doesn't matter whether it's 1" thick or 10" thick if the material isn't up to the task.  You want a blanket to do the job right and last the life of your turbo?  You found it.
*We spent months testing materials.  The materials in this blanket far outperformed dozens of other materials tested.  Temperature rated well beyond what your turbo can produce to ensure long life.  These blankets have lived through oil induced underhood fires, nitrous backfires, turbo breakages, you name it.  Never, ever, has a blanket caught on fire or not been usable after those problems.  Better than fiberglass, better than ceramic.  Best bang for your buck you'll find in the turbo blanket market.
*
Made in the U.S.A.  With materials from the U.S.A.  Don't be fooled by cheaper Chinese blankets or copied blankets.  Researched, developed, and produced by Turbo Performance.
*We've sold hundreds of blankets without any complaint to performance of the blanket.  Proven, time and time again.
*On dozens of 1000+hp vehicles, some of them diesels creating more than 2000 degrees a pass.  Zero heat issues with the blankets.
*
Need custom blankets or don't see a blanket for your application?  Contact us, we can build blankets for most hot parts
.