Aluminum 7.5'' Stepped Intercooler for BMW E90 E91 E92 E93 335i 335xi 2007-2011

Description

Product Description
7.5" Stepped Race FMIC W/ 2007-12 135i/335i N54 N55 E90 E92 E82
This listing is for vehicles that require the lower charge pipe add on. It is REQUIRED for 2009+ Vehicles. If you have a 2007-2008 135i or 335i you can still utilize this lower charge pipe upgrade but it is not required.
7.5" Stepped Race FMIC W Fits 07-12 135i/335i N54 N55 E90 E92 E82
Product Description
7.5" Stepped Race FMIC W/ 2007-12 135i/335i N54 N55 E90 E92 E82
This listing is for vehicles that require the lower charge pipe add on. It is REQUIRED for 2009+ Vehicles. If you have a 2007-2008 135i or 335i you can still utilize this lower charge pipe upgrade but it is not required.
Replace your overheated factory intercooler with the 7.5" race intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price point. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
Intercooler Core
The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.
We remedy this problem with our ultra high density 1000hp custom bar and plate core design which utilizes a staggered and offset internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. This intercooler was specifically designed for upgraded turbo cars running larger twin turbos or single turbos. This custom core is 1080 cubic inches in total and is 134% larger than the stock intercooler.
100% brand new, never been tried of installed.
Ultra High Desnity Bar & Plate Core
134% Larger Than OEM FMIC
Cast Aluminum End Tanks
Easy install, less than 2.5 hours
Professional installation recommended.
No instruction included.
Fitment：
2008-2011 E82 BMW 135i
2007-2011 E90/E91/E92/E93 BMW 335i/xi
2011-2012 E92 BMW 335is
Package including：
1X FMIC Intercooler
As Pictures Show
Payment
We accept eBay payment and other payments through eBay payment
Shipping
Items will be shipped within 1 business days after your payment is cleared.
All Customer's items will be shipped from our CA or NJ warehourse
Import duties, taxes and charges are not included in the item price or shipping charges
International orders may take 1~3 weeks to arrive
Returns
You can return your
unused items back for exchange or refund within 60 days
.
Please contact us for return process before you return the item.
Customer service
Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.
Our Store
Main Products
Promotion Items
Shop Category
Store Home
Exhaust Systems
◈  Exhaust Manifolds & Headers
◈  Exhaust Pipes & Tips
◈  Exhaust Tips
◈  Mufflers
◈  V Clamps
◈  Turbo Chargers & Parts
◈  Exhaust Wraps
◈  Exhaust cutout
Intake Systems
◈  EGR Valves & Parts
◈  Air Intake Systems
◈  Cylinder Heads & Parts
Timing Components
◈  Timing Chain Kit
◈  Timing Belt Water Pump Kit
◈  Control Solenoid Valve
Suspension & Steering
◈  Shocks & Struts
◈  Coil Springs
◈  Lift Kits & Parts
Chassis Parts
◈  Control Arms & Parts
◈  Control Arms & Parts-OEM
◈  Control Arms
◈  Sway Bars
◈  Caster/Camber Kits
Engines & Components
◈  Motor Mounts
Cooling Systems
◈  Fans & Kits
◈  Radiators & Parts
◈  Intercooler Piping Kit
Exterior
◈  Grilles
◈  Hoods
Brakes & Brake Parts
◈  Air Dryers
Interior
◈  Locks & Hardware
Automotive Repair Kits
◈  Other Automotive Tools & Suppl
◈  Diagnostic Service Tools
Other Parts
◈  Go Kart Parts
◈  Connectors & Terminals
Lighting & Lamps
◈  Xenon Lights
Gaskets
◈  Cyl. Head & Valve Cover Gasket
Hangers, Clamps & Flanges
◈  T Clamps
◈  Narrow Clamps
◈  Step Clamps
Transmission & Drivetrain
◈  Universal Joints & Driveshafts
Air Intake & Fuel Delivery
◈  Fuel Inject. Controls & Parts
Turbos, Nitrous, Superchargers
◈  Turbo Chargers & Parts
◈  Turbo Chargers Rebuild Kit
Fuel oil line & fitting
◈  Fuel oil line
◈  Fuel oil fitting
Other
Hot Item
Forged/Front 1-3" Leveling Kit W/ Shock Extender Fits GMC Chevy 2500 3500 99-13
USD 29.99
2.5'' Inch Stainless Steel V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes
USD 14.29
1PC 2.75" (2.99"-3.31") 301 Stainless Steel T Bolt Clamps Clamp 77mm-85mm
USD 3.46
2" Front Leveling lift kit Fit Chevy Silverado GMC Sierra GM 1500 LM 07-17 Black
USD 16.66
Universal 3" Inch Stainless Steel V-Band Turbo Downpipe Exhaust Clamp Vband 76mm
USD 18.46
Picture
New List Item
BLACKHORSE-RACING 3'' SS V-Band Flange Clamp Kit Male/Female Exhaust Downpipe
USD 17.99
Blue Burnt Exhaust Duo Slant Cut Tip Polished Stainless Thick Edge 2.5" In 4"Out
USD 19.99
INTAKE & EXHAUST VALVES FOR 94-01 ACURA HONDA 1.6L 1.8L B16A3 B16A2 B18C1 B18C5
USD 40.00
CH1206101 GRILLE AIR INTAKE ASSEMBLY FITS 2014 2015 2016 2017 2018 JEEP CHEROKEE
USD 135.00
DUAL 4.5"TIP STAINLESS RACING CATBACK MUFFLER EXHAUST SYSTEM FOR W20 MR-2 SW20
USD 145.99
7.5" Stepped Race FMIC W Fits 07-12 135i/335i N54 N55 E90 E92 E82
Product Description
7.5" Stepped Race FMIC W/ 2007-12 135i/335i N54 N55 E90 E92 E82
This listing is for vehicles that require the lower charge pipe add on. It is REQUIRED for 2009+ Vehicles. If you have a 2007-2008 135i or 335i you can still utilize this lower charge pipe upgrade but it is not required.
Replace your overheated factory intercooler with the 7.5" race intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price point. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
Intercooler Core
The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.
We remedy this problem with our ultra high density 1000hp custom bar and plate core design which utilizes a staggered and offset internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. This intercooler was specifically designed for upgraded turbo cars running larger twin turbos or single turbos. This custom core is 1080 cubic inches in total and is 134% larger than the stock intercooler.
100% brand new, never been tried of installed.
Ultra High Desnity Bar & Plate Core
134% Larger Than OEM FMIC
Cast Aluminum End Tanks
Easy install, less than 2.5 hours
Professional installation recommended.
No instruction included.
Fitment：
2008-2011 E82 BMW 135i
2007-2011 E90/E91/E92/E93 BMW 335i/xi
2011-2012 E92 BMW 335is
Package including：
1X FMIC Intercooler
As Pictures Show
Payment
We accept eBay payment and other payments through eBay payment
Shipping
Items will be shipped within 1 business days after your payment is cleared.
All Customer's items will be shipped from our CA or NJ warehourse
Import duties, taxes and charges are not included in the item price or shipping charges
International orders may take 1~3 weeks to arrive
Returns
You can return your
unused items back for exchange or refund within 60 days
.
Please contact us for return process before you return the item.
Customer service
Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.