GFB T9460 VTA DV+ Diverter Valve w/ BOV Sound for 2017-2019 Ford Focus RS

Description

VTA T9460 DV+ Performance, Blow Off Valve Sound!
The VTA is a performance blow-off valve solution for the Ford Focus RS..
If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.
The factory diverter valve found on these cars has two distinct issues – reliability, and performance. Oh yeah, it also doesn’t make any noise! Here’s how the VTA addresses these problems.
Reliability
– There are two ways in which the factory diverter valve can fail; the un-reinforced rubber diaphragm can rupture, and the metal valve stem that slides in the plastic cap can stick. In both cases, there is a risk to the turbocharger, as the ECU will attempt to compensate for a boost leak by increasing the wastegate duty cycle, which increases the turbo RPM significantly.
The VTA features CNC machined billet components that last a lifetime and cannot be damaged by high boost pressures or the associated increased charge temperatures.
Performance
– The factory diverter valve typically operates in only two states – either fully open, or fully closed. When it opens at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition, which is noticeable as a distinct “step” down in power as you roll off the throttle and the valve opens.
The VTA however allows the piston to open and close progressively in response to the amount of boost pressure present, so it only vents enough air to prevent compressor surge (the primary purpose of a diverter or blow off valve). This helps to smooth out boost transitions, making the throttle response more linear and predictable, and also minimizes lag introduced by the factory diverter valve.
Sound
– The VTA, as its name suggests, vents the air to atmosphere for maximum “whoosh” noise when you lift off the throttle. On the Focus RS, there is no MAF sensor and hence no drivability or fuelling issues when venting to atmosphere.
.
Key features:
TMS Technology for faster boost recovery on gearshift and during throttle modulation
Improved boost holding ability
Atmosphere venting for blow-off sound
Simple, direct bolt-on kits include everything you need
install
Made in Australia
VTA or DV+?
Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet.
Why choose a VTA over a “BOV spacer”? “
BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the factory diverter components or operation method in any way. The VTA improves the operation of the factory diverter valve for sound AND performance..
MANUFACTURER PART #T9460
Condition:  100% Brand New, Never Used or Installed
Availability: Order will ship directly from their distributor
Fitment:
2017-2019 Ford Focus RS
Payment:
Payment Method:
We accept payment thru Paypal only.  Please make sure you put the correct shipping address when doing the checkout. Any return item due to incorrect / incomplete address, Buyer has to pay the shipping cost to reship the item.
Processing Time:
Most items will be shipped within 1 business days after payment received unless for items that specific for drop ship from manufacturer or distributor.  Item on backorder will be Notified by email within 48 hrs.
Shipping Carriers(Domestic only):
UPS/FEDEX/USPS (depend on location & item size)
Domestic Shipping rate:
Please use the "Shipping and Payments" tab on top to check the rate
International Shipping Rate:
Please use the "Shipping and Payments" tab on top to check the rate
Warranty:
Please inspect your order upon receipt.  No damage claims will be honored after 14 days of delivery.
All item we sold come with 60 days defective warranty from the date
We will cover shipping for exchange if we shipped incorrect quantity, incorrect item or defective item
In a case when return is requested, we require the buyer to follow standard RMA procedures by obtaining a RMA number before sending the product back to us.
***Returning an item without following proper procedures will delay the claim process, and we reserve the right to refuse any unauthorized return packages***.
In some occasions we might request images as supporting document for damage/ defective claims to help us determine the best and most effective resolution toward the problem. When this happens, a designated e-mail address will be provided to the buyer so images files can be attached, as the eBay message system does not allow image attachments at the moment.
Customer Services:
If you have any questions before buying or after you have purchased the item, please do not hesitate to contact our customer service support team. Our office hours are Monday to Friday 10am-6pm PST , we are off during the weekends and all major holidays and you will be guaranteed that your questions will be replied promptly. Normally we can reply your email within 24hr but if you email to us during weekends, we have to reply to you on the following Monday in the order as it's received.  If you have a problem about your shipment, please email us to solve it before leaving a negative feedback.
Powered by SixBit's eCommerce Solution