Overhead Ladder Storage Rack | Hi-Port 2 | Adjustable Ceiling Mount

Description

Ladders starting to take over your garage?
The Hi-Port 2 is your answer. The Hi-Port 2 will free up garage or shed space by occupying the under-utilized overhead space by handling a small fleet of ladders. Double, triple, or even quadruple ladders--or just about as many tools as you're willing to stack--can fit on this rack. The possible utility of this heavy duty steel rack is almost too long to describe, but we'll try anyway...
Fits a wide range of ladders:
Removable arms for ladders up to 25" wide:
The removable arms extend 25" from the center post and attach at a slightly upward angle. This allows you to confidently place your larger ladders on each side with plenty of support.
150 lb. capacity
:
Store up to 75 lbs. per side, plenty of support for your standard ladders and even allow you to stack multiple ladders on each side.
Stackable ladder setup:
Drop the center post to full extension and you'll have 18" of height between ceiling and arms; plenty of room to stack multiple ladders. Each of the 2 posts is individually mounted so ladder length won't be an issue. As long as your garage, shed, or basement is long enough, your ladders can be stored up and out of the way.
3-point adjustability:
Extension/retraction post minimizes space
used:
The center post can drop down to maximize storage (18" space from ceiling), or retract (10" space from ceiling) to allow for greater clearance beneath the rack.  Mounting holes at approximately 1" intervals allow for your optimal setup. "Low bridge" clearance (maybe you want to park a car beneath the rack?) is approximately 12" below the ceiling.
90 degree mounting rotation to use on any ceiling:
This is a big one since ladders can be very long and garages have joists that only run in one direction. The Hi-Port 2 opens up new possibilities by allowing you to mount the rack with arms running either parallel or perpendicular to the ceiling rafters.
Removable, padded arms:
If only using one side, allows the post to be mounted against a wall.
Heavy duty, steel construction:
Suitable for outdoor use:
Coated steel components will hold up against the elements, so go ahead and mount under a deck or carport.
"No slip"
padding:
Full length arm padding won't slip or roll, but will grip your ladders or tools.
Gated pins prevent accidental
movement:
Post pins lock in place with an integrated gate to fully secure the posts.
Clearance from ceiling = 10" - 18"
Support arm width = 25"
Rack width with both arms attached = 52"
150 lb. capacity
Ceiling Mount Plate is 2" x 8"