Turbocharger T04E T3/T4 .63 A/R 57 Trim Compressor 400+HP External Wastegat

Description

Application
This item fits: Universal Application.
Compatible for 1.5L to 2.5L any 4/6 cylinder engine
Specification
Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns
Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern
Cooling Type: Oil Cooled
Wastegate: External Wastegate
Compressor Trim: 48.1
Compressor A/R: 0.5
Compressor Inducer: 52.7mm
Compressor Exducer: 76mm
Turbine Trim: 74.2
Turbine A/R: 0.57
Turbine Inducer: 64.8mm
Turbine Exducer: 55.8mm
Turbine exhaust inlet：45mm/87mm
Compressor outlet：42mm(inside diameter)、52mm(outer diameter)
Compressor inlet：68 mm(inside diameter)、77mm(outer diameter)
Hosepower: Up to 400+HP
Condition: Brand New
Package Size:26x 25x 23 cm
Package Weight: 7250g
Feature
*Product Material
1. Turbine housing ：Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius
2. Steel Turbine Wheel：Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius
3. Compressor housing：ZL104 aluminum with lightweight
4.Compressor wheel/blades：Cast aluminium with good gas tightness and corrosion resistance
*Product Performance
1. Cost effective turbocharger give your car 20-40% more total power
2. Rich Experience In Turbo Production And Own Factory
3. Quality Assurance
4. High-Speed Oil Seal Ring
5. Strict Quality Inspection
6. Precision Clearance
7. High-speed Accessories
8. Improve Emissions & Save Oil
*Key Feature
1. High Quality Material, Cast Housing with Durable Steel
2. Boost Engine Horsepower Significantly
3. Increase Engine Power and Torque Outpout;
4. Maintain Combustion Chamber Pressure and Fuel/Air Load
5.Contructed with High Quality Material
6. Built for Durability and Strength
Note
* Professional Installation is Highly Recommended， Instruction is NOT Included
* Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.
* Does NOT have a internal wastegate so you must have a external wastegate on your manifold.
Technology Advantage
1. 100% balancing Test by TURBOTECHNICS VSR3
This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability.
2. G3-min-Flow VNT Turbo testing
The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo and verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop.
3. Advanced Actuator Tester/Programmer
Electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators and also allows to modify operation range of the actuator arm, that includes changing open and close positions of the working angle.
Cost effective turbocharger give your car 20-40% power than a non-turbo car of the same year, make and model
Ductile Iron QT450-10, the material used for the exhaust housing, is temperature resistant up to 700℃
K418 Alloy, the material used for the exhaust impeller, has high oxidation resistance & stability (resistance up to 900℃)
The cast aluminium blades are great airtight seal, airflow, light weight, and corrosion resistant
About MaXpeedingrods
Shipping Policy
Returns Policy